Mold Removal Plus 772-GOT-MOLD

Home › Water Damage Repair

Water Damage Repair

Dried, repaired, and rebuilt — water damage handled start to finish by one licensed company.

5.0 on Google · 7 reviews Leave us a review
★ 5.0 on Google · 7 reviews· Mold Assessor MRSA4171· Mold Remediator MRSR4242· Building Contractor CBC1262255· AC Contractor CAC1822191· Licensed & Insured — Open 24 Hours

Water damage repair starts with a clock. In Florida humidity, mold can start growing on wet drywall within a day or two, so water damage repair Fort Pierce homeowners call about is rarely just about the water — it is about how fast the structure gets dried and what has to be rebuilt. We dry, remove what water ruined, treat what stays, and rebuild under our Certified Building Contractor license (CBC1262255): one company from the first moisture reading to the final coat of paint.

The damage water leaves behind

A burst pipe announces itself. A slow supply-line drip, a dishwasher leak, or a roof leak during storm season does its work quietly — soaking drywall, swelling baseboards, rotting subfloors and framing for weeks before the first stain or musty smell shows. By the time most people call, the repair list includes removal and drying plus drywall repair and often structural rot repair. We scope all of it up front, in writing.

How we repair water damage

1

Stop the water

The leak or intrusion source is found and stopped first — nothing else matters until then.

2

Extract & dry

Standing water out, then drying equipment and moisture readings until the structure verifies dry.

3

Remove what’s ruined

Wet drywall, insulation, and damaged material come out; mold is treated as part of the job.

4

Repair the structure

Rotted framing and subfloors replaced to code under CBC1262255.

5

Rebuild & finish

Drywall, flooring, cabinets, and paint — the room put back together.

On the job

water damage repair Fort Pierce — new drywall going up during a rebuild
Rebuild underway after drying
water damage repair — rotted framing exposed by a long-term leak
Rotted framing from a slow leak
water damage rebuild — finished room with fresh paint and new tile after repair
Finished: rebuilt room, fresh paint & new tile
commercial water damage repair — large space with floors protected and furniture wrapped during ceiling repair
Commercial ceiling repair — floors protected, furniture wrapped
commercial water damage repair — ceiling opened above a tiled column with the duct exposed
Ceiling opened above a tiled column, duct exposed
water damage drying — a dehumidifier and air movers set up to dry a home’s living and dining area after water damage, crew on site
Drying setup: dehumidifier and air movers working a living and dining area after water damage
water damage dry-out — a technician with a headlamp inspecting during a dry-out, air movers and a dehumidifier running in the room
Headlamp inspection during a dry-out, air movers and dehumidifier running
water damage drying — an air mover drying a hallway inside a home
Air mover drying a hallway inside a home
water damage — water staining on a condo building stairwell after a leak, equipment staged at the top
Water staining on a condo stairwell after a leak, equipment staged at the top

Frequently asked questions

How fast does mold grow after water damage?

In Florida humidity, mold can begin growing on wet drywall and wood within 24 to 48 hours. That is why drying speed matters more than almost anything else after a leak — and why water damage and mold removal so often end up being the same job.

Will insurance cover mold removal?

Sometimes. Mold that results from a sudden, accidental water event — a burst pipe, for example — is often covered up to a policy limit, while mold from a long-term leak or deferred maintenance usually is not. Every policy is different, so check yours. We document the job with photos and moisture readings and provide the paperwork your carrier asks for, but we cannot act as your insurance adjuster.

How long does mold remediation take?

Most residential mold remediation jobs take one to three days for the removal itself once containment is set — a small area can be finished in a day, while larger or multi-room jobs take longer. Drying and the rebuild add time after that. We give you a realistic schedule in writing before we start, so you know what to expect.

Do you rebuild what you tear out, or do we hire another contractor?

We rebuild it. Mold Removal Plus is a licensed Certified Building Contractor (CBC1262255) as well as a licensed mold assessor and remediator, so the same company that removes the mold puts the drywall, bathroom, kitchen, or framing back together. One call, one company, start to finish — we don’t just remove it, we put the room back together.

Mold or water damage? We answer 24 hours.

Call 772-GOT-MOLD Book an inspection