Mold Removal Plus 772-GOT-MOLD

Home › Drywall Repair After Water Damage

Drywall Repair

Water-damaged drywall removed and replaced — finished and painted so the repair disappears.

5.0 on Google · 7 reviews Leave us a review
★ 5.0 on Google · 7 reviews· Mold Assessor MRSA4171· Mold Remediator MRSR4242· Building Contractor CBC1262255· AC Contractor CAC1822191· Licensed & Insured — Open 24 Hours

Drywall repair after water damage is not a patch job. Drywall that has been wet grows mold inside the wall cavity, on the back of the board where no paint or cleaner reaches — so bubbled paint, soft spots, and stains mean the board has to come out, not be covered up. We remove damaged drywall, treat and dry the cavity, check the framing behind it, then hang, finish, texture-match, and paint so the repair disappears.

When drywall has to come out

  • Paint bubbling, blistering, or peeling along a wall or ceiling
  • Soft or spongy spots when you press the wall
  • Water stains that keep spreading or coming back
  • A musty smell along one wall with no visible mold
  • Baseboards swelling, separating, or darkening

How we do it

1

Open & inspect

Damaged board removed and the cavity inspected for mold and rot.

2

Treat & dry

Cavity treated, structure dried and verified dry.

3

Repair framing

Any rotted studs found behind the board are replaced.

4

Hang & finish

New drywall hung, taped, and finished.

5

Texture & paint

Texture matched and painted so the repair disappears.

During & after

drywall repair Fort Pierce — new drywall being hung during a rebuild
During: new drywall going up
drywall repair Port St. Lucie — finished room after drywall repair and paint
After: fresh paint & new tile
drywall repair — freshly patched and refinished ceiling
Ceiling patched and refinished
drywall repair — flood-cut drywall replaced with new drywall, seams mudded
Flood-cut drywall replaced, seams mudded
drywall repair — new drywall built back around a bay window
Drywall build-back around a bay window
drywall repair — technician in red protective gloves and sleeves hand-finishing drywall inside a closet
Hand-finishing drywall inside a closet

Frequently asked questions

Can wet drywall be dried in place, or does it have to come out?

Lightly damp drywall caught within a day or so can sometimes be dried in place. Drywall that stayed wet, shows mold, or feels soft has to come out — mold grows on the back of the board inside the wall, where drying and cleaning cannot reach. We check the cavity with moisture readings and tell you honestly which case you have.

What causes mold to keep coming back?

Mold comes back when the moisture that fed it was never fixed. Cleaning the surface without stopping the leak, the condensation, or the humidity just resets the clock. That is why every job we do includes finding and fixing the moisture source and drying the structure — and why we test again at the end.

How long does mold remediation take?

Most residential mold remediation jobs take one to three days for the removal itself once containment is set — a small area can be finished in a day, while larger or multi-room jobs take longer. Drying and the rebuild add time after that. We give you a realistic schedule in writing before we start, so you know what to expect.

Will the repair match the rest of the wall?

Yes. We texture-match and paint the repaired area so it blends with the surrounding wall — the goal is a repair you cannot find when we are done.

Mold or water damage? We answer 24 hours.

Call 772-GOT-MOLD Book an inspection